There isn’t a lot that’s more frustrating than working on HVAC problems when it’s really hot or cold outside. You need to know as much as possible in order to be sure your equipment is properly repaired or your new one is installed properly. Read this article to learn more.
Before contacting a repair service, do a short tour of the entire home. Jot down the rooms that are hot and the ones that are cold. This will allow a contractor to quickly figure out what the issue is and how it can be fixed fast.
Before selecting a HVAC repairman, know what you need done. If you can’t describe the problem, you may not get an accurate quote. You need to know how to describe any issues. Know this stuff ahead of time.
Clean the coils and blades in your condenser at the beginning of summer. Always shut the power off before doing any work or cleaning on the unit. Take away all of the debris as well.
Outdoor condenser units need to be cleaned regularly. Things tend to pile up around these units, especially after storms come through, which could cause problems to your system. Overheating may be the result if you don’t.
Each spring, clean the fan blades and coils on your condenser. First, turn the power off so nothing moves when you’re working with it. Then, remove the grill, then remove the blades and begin the cleaning process of the blades and the unit.
If the fan on your condenser includes oil ports, they must be lubricated annually. Most of these ports have some sort of protective cap covering them. Look for an oil that is lightweight and then put about 10 drops inside the port. You don’t want to put in too much.
Getting help from a HVAC professional might be intimidating. Knowledge will go a long way to improving the experience for you. It is hoped you are now prepared for any future issues with your system.